Every pressure cooker owner knows the frustration of a lid that won’t seal or a valve that won’t vent, right when you’re ready to cook. The right replacement parts don’t just fix these headaches; they keep your appliance safe and reliable for years. Whether you’re canning tomatoes in an All American or whipping up weeknight meals in a Presto, having the correct gasket, regulator, or float valve on hand means one less thing to worry about. Below, I’ve matched common pressure cooker models with the parts that fit them best, so you can skip the guesswork and get back to cooking.
List of National Pressure Cooker Parts
Not sure which part you need? Start here. This table breaks down the most common pressure cooker replacements by function and compatibility. Each entry highlights what the part does and which models it fits, so you can quickly spot the right fix for your appliance.
| Product |
Best For |
Why |
Link |
| Pressure Regulator Weight and Vent Pipe Replacemen |
All American regulator replacement |
A must-have weight and vent pipe set for All American canners, keeps pressure steady at 18 pounds. |
View |
| Pressure Cooker Plug Rubber Safety Device That Aut |
All American safety plug |
Rubber overpressure plug for 1930 series All American models, automatically vents steam if pressure gets too high. |
View |
| Bonsicoky Universal Pressure Cooker Relief Jigger |
Universal jigger valve |
Sturdy stainless steel relief valve for standard 80KPA cookers, includes anti-blocking parts for smooth operation. |
View |
| Presto Pressure Cooker Sealing Ring With Air Vent |
Presto 4-quart seal |
Replacement gasket and air vent for 4-quart Presto pressure cookers, dishwasher-safe and seals tight. |
View |
| Anakel Home Replacement Handle Kit Compatible with |
Fagor Express 99 handle |
Full handle kit with regulator for Fagor Express 99, heat-resistant Bakelite grip and all the screws you need. |
View |
| 2 Pcs Universal Replacement Floater Valve with 6 P |
Universal electric float valve |
Float valve and silicone gasket set for electric pressure cookers, rust-proof aluminum and easy to install. |
View |
| MEFONKOU 09907 Pressure Canner Sealing Ring & Auto |
Pre-1977 Presto sealing |
Sealing ring and vent kit for older Presto models, restores the airtight seal for consistent cooking. |
View |
| Universal Pressure Cooker Jigger Valve Replacement |
Standard 80KPA valve |
High-temp alloy regulator weight for universal pressure cookers, fits standard 10mm lid holes. |
View |
| Hasanbar Pressure Cooker Plug Rubber, Overpressure |
All American 1930 plug |
Two-pack of rubber safety plugs for All American steam canners, replace annually for safe canning. |
View |
🥫
Best for All American Canners
All American pressure canners are built to last, but their parts take a beating during long canning sessions. If your regulator weight isn’t jiggling or the vent pipe looks worn, it’s time for a replacement. These parts are the backbone of your canner’s safety system, ensuring pressure stays at the 18-pound mark for safe food preservation. I’d check these first if your canner isn’t holding pressure like it used to.
⭐ TOP PICK
Pressure Regulator Weight and Vent Pipe Replacement Parts Fi
This set includes both the regulator weight and vent pipe, which work together to control pressure automatically. It’s compatible with nearly every All American model, from the 10.5-quart to the 41.5-quart, so you won’t need to hunt for separate pieces. The weight’s audible jiggle is a simple way to confirm it’s working, no guesswork required.
✦ Includes vent pipe✦ Maintains 18 pounds✦ Wide model compatibility
💡 Pro Tip: If the weight isn’t jiggling, your canner might not be reaching the right pressure. Listen for that steady rhythm to know it’s doing its job.
🔄 RUNNER-UP
Pressure Cooker Plug Rubber Safety Device That Automatically
This rubber plug acts as a safety net for 1930 series canners, venting steam if pressure spikes unexpectedly. It’s a small part, but it’s your last line of defense against overpressure.
View Alternative
⚡
Best for Electric Pressure Cookers
Electric pressure cookers rely on float valves to create a tight seal, and when they fail, the cooker won’t build pressure. If your lid isn’t locking or steam is escaping, the float valve and gasket are likely the culprits. Replacing them is a quick fix that restores your cooker’s performance, no need to buy a new appliance. I’d keep a spare set on hand if you use your electric cooker often.
⭐ TOP PICK
2 Pcs Universal Replacement Floater Valve with 6 Pcs Silicon
This kit includes a durable aluminum float valve and six silicone gaskets, so you’ll have backups for future replacements. The gaskets are made from high-quality silicone, which stays flexible longer than rubber. Installation is straightforward: just insert the float from the outside and lock it in place with the gasket.
✦ Aluminum alloy construction✦ Includes six gaskets✦ Easy snap-in installation
💡 Pro Tip: If the gasket isn’t seated flat, steam will escape. Press it firmly into place before locking the lid.
🔄 RUNNER-UP
Bonsicoky Universal Pressure Cooker Relief Jigger Valve, 2PC
This stainless steel relief valve is a solid choice for standard pressure cookers. It includes an anti-blocking cover to prevent food debris from clogging the vent.
View Alternative
⏲️
Best for Presto Models
Presto pressure cookers are workhorses, but their gaskets and air vents wear out over time. If your lid isn’t sealing properly or the vent pipe is clogged, your cooker won’t build pressure. The 4-quart models, in particular, need a precise fit to lock in moisture and flavor. I’d replace the gasket at the first sign of cracking or hardening, it’s a cheap fix that prevents bigger problems later.
⭐ TOP PICK
Presto Pressure Cooker Sealing Ring With Air Vent 4 Qt.
This gasket is designed specifically for 4-quart Presto models, ensuring a snug fit that won’t leak. The included air vent is dishwasher-safe, so cleanup is a breeze. A tight seal means your food cooks evenly and retains its moisture, no more dry, overcooked meals.
✦ Dishwasher safe✦ Secure rubber seal✦ Custom fit for 4qt
💡 Pro Tip: After each use, wash the gasket with warm, soapy water and check for cracks. A well-maintained gasket lasts longer and seals better.
🔄 RUNNER-UP
MEFONKOU 09907 Pressure Canner Sealing Ring & Automatic Air
For older Presto models, this kit includes a sealing ring and automatic air vent, essential for restoring the cooker’s original performance.
View Alternative
🔧
Best for Fagor Express 99
The Fagor Express 99 series has a unique handle and regulator system, and if either fails, the whole lid can become unusable. A broken handle makes the lid awkward to open, while a faulty regulator can prevent the cooker from building pressure. This complete kit replaces all the critical components at once, so you won’t have to piece together a fix. I’d go for this if your Fagor lid is showing its age, it’s a cost-effective way to extend its life.
⭐ TOP PICK
Anakel Home Replacement Handle Kit Compatible with Fagor Rap
This kit includes the handle, lid, pressure regulator valve, chimney, and all the screws you need for a full replacement. The handle is made from heat-resistant Bakelite, so it won’t melt or warp under high temperatures. It’s a one-stop solution for Fagor owners who want to avoid buying a new pressure cooker.
✦ Complete handle kit✦ Heat-resistant Bakelite✦ Includes regulator valve
💡 Pro Tip: Before installing, check the chimney thread size to ensure it matches your lid. A mismatched thread can cause leaks.
🔄 RUNNER-UP
Pressure Regulator Weight and Vent Pipe Replacement Parts Fi
While not for Fagor, this regulator weight is a high-quality option for large-capacity cookers that need precise pressure control.
View Alternative
🥘
Best for Universal 80KPA Cookers
Most standard pressure cookers operate at 80KPA, and their regulator weights are designed to release steam at that exact pressure. If your weight is damaged or missing, your cooker won’t function safely. A universal replacement is often the easiest solution, as long as it fits the central hole in your lid. I’d look for one made from high-temperature alloy, it won’t warp under heat and will last for years.
⭐ TOP PICK
Universal Pressure Cooker Jigger Valve Replacement with Exha
This universal regulator weight is made from a high-temp alloy that won’t bend or corrode over time. It fits standard 10mm lid holes and maintains steady 80KPA pressure, which is critical for safe cooking. The exhaust rod is included, so you won’t need to buy additional parts.
✦ Heat-resistant alloy✦ Standard 80KPA rating✦ Fits 10mm holes
💡 Pro Tip: If the valve isn’t moving freely, check for food debris in the exhaust rod. A quick clean can restore proper function.
🔄 RUNNER-UP
Bonsicoky Universal Pressure Cooker Relief Jigger Valve, 2PC
This jigger valve is another solid option, with a plastic head to prevent scalding and a simple design that’s easy to install.
View Alternative
🛡️
Best for Safety Maintenance
Overpressure plugs are the unsung heroes of pressure cooker safety. They act as a backup vent if the primary system fails, releasing steam before pressure gets dangerously high. Rubber plugs can harden or crack over time, so I’d replace them annually, especially if you use your cooker for canning. It’s a small investment that prevents big problems.
⭐ TOP PICK
Hasanbar Pressure Cooker Plug Rubber, Overpressure Plug Fits
These plugs are designed specifically for All American 1930 models, ensuring a perfect, leak-proof fit. The rubber is durable and flexible, so it won’t crack under high heat. A two-pack means you’ll always have a spare on hand for quick replacements.
✦ High-quality rubber✦ Perfect for 1930 models✦ Essential safety device
💡 Pro Tip: Mark your calendar to replace these plugs every year. Fresh rubber is more reliable in an emergency.
🔄 RUNNER-UP
Pressure Cooker Plug Rubber Safety Device That Automatically
This four-pack of rubber plugs is a great value if you manage multiple canners or want extra spares for long-term use.
View Alternative
🎯 Which Scenario Are You?
Picking the right pressure cooker part comes down to two things: your cooker’s model and what’s broken. A gasket won’t fix a faulty regulator, and a universal valve won’t work if it doesn’t match your cooker’s pressure rating. Start by identifying the part you need, then check compatibility with your specific model. These questions will help narrow down your options based on how you use your cooker.
❓ What is your primary concern?
First, figure out whether you need a safety part (like an overpressure plug) or a performance part (like a gasket or regulator). Then, match the part to your cooker’s model number, most listings include a compatibility chart.
❓ What is your budget level?
Most replacement parts are affordable, but don’t cut corners on safety components. A high-quality regulator or plug is worth the extra few dollars for long-term reliability.
❓ How often will you use it?
If you use your pressure cooker weekly, keep spare gaskets and plugs on hand. For canners, I’d stock up on regulator weights and vent pipes, these parts wear out faster with frequent use.
Frequently Asked Questions
How do I know which national pressure cooker parts fit my specific model?
Your cooker’s manual should list the exact part numbers you need. If you don’t have the manual, check the lid or base for the model number, then cross-reference it with the product’s compatibility list. When in doubt, measure the old part, dimensions like lid hole size or gasket diameter can help you find a match.
When should I replace the rubber gaskets on my pressure cooker?
Gaskets should be replaced at least once a year, or sooner if they’re cracked, hardened, or no longer sealing tightly. A worn gasket can prevent your cooker from building pressure, leading to uneven cooking or safety risks.
Can I use universal national pressure cooker parts for any device?
Universal parts can work, but only if they match your cooker’s pressure rating and dimensions. For example, a regulator weight for 80KPA cookers won’t work in a 15PSI canner. Always double-check the specs before buying.
Are these national pressure cooker parts safe for high-pressure canning?
Yes, but the part must be rated for your cooker’s pressure requirements. A regulator weight designed for 15PSI canners won’t work safely in a 10PSI cooker. Stick to parts that match your appliance’s specifications.
Why is my pressure cooker not building pressure after replacing parts?
First, check that the sealing ring is clean and seated correctly in the lid groove. Then, inspect the float valve, it should move freely and not be stuck. Finally, ensure the vent pipe isn’t clogged with food residue. A quick clean or adjustment often fixes the problem.
