Lustre Craft Cookware Replacement Parts: Handles, Knobs and Lids

Updated 5 November 2026Checked the brand’s web addressHandles, knobs and lids

Quick answer

Finding genuine Lustre Craft (Kitchen Craft) replacement parts is hard. When we checked in November 2026, lustrecraft.com was a parked domain listed for sale, so there was no official online parts store to order from.

Your best options are to contact the dealer or company you bought from, buy original used parts from resellers, or fit a universal replacement knob or handle that matches the screw size and hole spacing.

Stainless steel pots and pans stacked in a cupboard
Lustre Craft and similar heavy stainless cookware often outlasts its handles and knobs. Photo: Poecus via Wikimedia Commons, Public domain
Key takeaways

  • Start with the dealer you bought from, and look for a warranty card that came with your set.
  • Knobs and handles usually attach with a single screw or two screws; measure both before buying.
  • Universal phenolic (Bakelite-style) knobs fit many lids if the screw thread matches.
  • Check any replacement’s oven-safe rating, as many plastic knobs are not oven-safe.
  • Keep the old screw and washer; reusing them often solves fit problems.

We may earn a commission from Amazon links on this page, at no cost to you.

Can you still buy Lustre Craft replacement parts?

Many owners search for “Kitchen Craft/Lustre Craft replacement parts store locations”. In practice, there is no simple answer. The lustrecraft.com address showed a domain-for-sale page when we checked, so we could not confirm a current official parts source.

Read More -  Chainmail Scrubber for Cast Iron Cookware: Versatile Solutions for Every Need

If you bought from a local distributor or dealer, contact that seller first, and keep your receipt or any warranty card handy.

Common Lustre Craft parts and what to do

Part Fix
Lid knob (cracked or loose) Tighten the screw; if broken, fit a universal knob with the same thread
Long handle (cracked or loose) Tighten screws; replace with a universal handle that matches the bracket and screw spacing
Side (helper) handles Usually riveted or welded; hard to replace at home
Vent or whistle knob Look for original used parts; generic knobs may not fit the vent
Lid Measure the inside diameter of the pot rim and look for a matching stainless lid

How to replace a Lustre Craft knob

  1. Remove the old knob. Unscrew it from inside the lid. Keep the screw and any washer.
  2. Measure. Note the screw thread size and length, and the knob’s base diameter.
  3. Buy a match. Choose a heat-resistant universal knob that takes the same screw, or one that includes screws of the right size.
  4. Fit it. Place the washer, then screw the knob on firmly from the inside. Do not over-tighten, or you can crack it.
  5. Check. Make sure it does not spin and the lid still seals evenly.

Shop universal lid knobs on Amazon →

How to replace a Lustre Craft handle

  1. Unscrew the old handle from its bracket on the pan.
  2. Measure the bracket: its width, height and screw position, plus the handle length you want.
  3. Choose a universal handle that slides over a similar bracket and uses the same screw position.
  4. Fit and tighten, then test by lifting the empty pan before cooking with it.
Read More -  Pull Out Rack For Pots And Pans: Versatile Solutions For Every Kitchen Need

Shop universal pan handles on Amazon →

Safety

A loose or cracked handle can fail when a pan is full and hot. Do not use the pan until the handle is secure. Never use a pan whose handle bracket is cracked or detached from the body.

Buying original used Lustre Craft parts

Resale sites often list original knobs, heat shields and lids from used sets. Check photos closely against your part, ask the seller for measurements, and confirm the condition before buying.

Frequently asked questions

Where can I buy Lustre Craft replacement parts?

The brand’s old web address was for sale when we checked, so start with the dealer you bought from, then try resale listings or universal knobs and handles.

How do I replace a Lustre Craft knob?

Unscrew it from inside the lid, measure the screw, and fit a heat-resistant universal knob with the same thread, reusing the washer.

Will universal handles fit Lustre Craft pans?

Some will. Measure the bracket and screw position and compare them with the replacement’s dimensions before ordering.

Is it worth repairing old Lustre Craft cookware?

Often yes. The stainless steel bodies last for decades, so a new knob or handle can keep them in use for years.

The bottom line

There is no easy official parts store for Lustre Craft today. Contact your original seller, look for original used parts, or fit universal knobs and handles that match your screws and brackets.

Sources

  • Status of the lustrecraft.com web address, checked 5 November 2026.
Amanda Whitaker
Latest posts by Amanda Whitaker (see all)

Similar Posts